Flake Ice Machines

  • Features of the Scotsman MF 66AX -14 including:

    Hermetic compressor. Stainless steel auger and freezing cylinder (evaporator). Equipped with an electronic control board. • Ice breaker made in specially strengthened alloy, allowing for greater extrusion pressure to deliver a dryer-quality of ice (85% dry). • Long-lasting stainless steel ball-bearings. Double protection – electronic rotation sensor and drive coupling – on gear motor and gear reducer. • Low-water sensor protection on refrigeration and gear motor system. Optical ice level sensor for machine shut down. • Stainless steel side panels in scotch-brite finish, with rounded corners for enhanced ease of cleaning and aesthetics. • Side panels are removable on all four sides to ease maintenance and after-sales service operations. • PS plastic top cover. • Reduced height to ease installation. • XSafe: natural sanitation system, integrated inside the ice maker and operating automatically 24/7 to keep equipment clean & safe.  
    • Production 1160kg of Flake ice in 24 Hour
      Modular flaked ice machine, produces 1160Kg every 24hrs, designed to be fitted to a separate storage bin. Ideal for Food Manufacturers, Fishing Industry, Medical Therapy and Laboratories
      Specification Overview:
      Model
      Scotsman MF66 (head only)
      Dimensions (W x D x H)
      1064x 697 x 860 mm
      Max production / 24hrs
      1160 Kg
      Recommended ice bin
       UHB 1100
      Ice type
      Superflake – 15% residual water
      Unit weight
      1779 Kg
      Water consumption (A)
      33.6 Litre/hr
      Energy Consumption (A)
      86.0 kWh/24hrs
      Refrigeration R452A – Remote Installation ONLY
      Voltage
      400v / 50hz / 3ph
      Fuse / CB rating
      16  amp
       Water filter set
      3M HF60-S  2x

                Recommended water filter 3M HF90-S:

    We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call. Product Code: SCOMF66
  • WRAS Approved Ice MachineFeatures of the Simag Self contained           CRUSHED ICE MAKER SPH 120 
    • Production 120kg  ice in 24 Hours
    • ICE BIN CAPACITY  55kg
    • High grade 441 stainless steel (scotch brite) exterior
    • Food safe plastic interior
    • Front vented - can be built in
    • Electronic controls
    • Power Supply: 13amp supply
    • Produces flaked ice - the residual water contents for Super Flakers SPN405 and above is 15%
    • Air cooled
    • Easily accessible components
    • Refrigerant R290
    • Weight (kg): 80
    • Decibels: 68dBA
    • Built in cleaning system
    • Storage bin not included
    • Recommended Water Filter HF-60-s
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
    • Includes 2 Year Warranty Parts Only
    • Free Kerb – Side Delivery : UK mainland only
    • External Dimensions (H x W x D mm): 770 x 590 x 9200
          In Stock                                                                 Product Code: SIMSPN405
  • WRAS Approved Ice MachineFeatures of the Simag SPN 405AS Flake Ice Maker:  
    • Production 320kg of Flake ice in 24 Hours
    • High grade 441 stainless steel (scotch brite) exterior
    • Food safe plastic interior
    • Front vented - can be built in
    • Electronic controls
    • Power Supply: 13amp supply
    • Produces flaked ice - the residual water contents for Super Flakers SPN405 and above is 15%
    • Air cooled
    • Easily accessible components
    • Refrigerant R290
    • Weight (kg): 80
    • Decibels: 68dBA
    • Built in cleaning system
    • Storage bin not included
    • Recommended Water Filter HF-60-s
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
    • Includes 2 Year Warranty Parts Only
    • Free Kerb – Side Delivery : UK mainland only
    • External Dimensions (H x W x D mm): 650 x 538 x 663
          In Stock                                                                 Product Code: SIMSPN405
  • Prodis GR390 Flaked Ice Maker

    390kg/24 Hour Production with optional storage Bin

    The Prodis GR390 ice flaker is ideal for locations that require a constant supply of flaked ice such as supermarkets, fish markets and gyms. The unit produces up to 565kg off flaked ice per day.  The GR series is fully electro-mechanical for high reliability and easy maintenance. A tropicalised condensing unit makes the GR series suitable for use in ambient temperatures of up to 43°c to cope in even the most demanding environments.
    • 390kg production per 24 hours
    •  storage bin not including
    • Low moisture content flaked ice
    • Heavy duty auger production system
    • Proven and reliable vertical evaporator production system
    • AISI304 Stainless Steel Construction
    • Tropicalied condensing unit, can run in ambients up to 43°C
    • Built in self cleaning cycle
    Optional Delivery Services: Unpack and position – 2 man delivery crew will bring the product into your premises, unpack and position the unit and remove and dispose of the packaging. The product will need to be delivered into your premises in its packaging so please ensure the packaged product will fit through your door before using this option. (Postcode dependent, ground floor only, no steps)
    Uplift and disposal service – The delivery team will uplift and dispose of your old product at the same time as delivering your new cabinet, the old unit must be empty, clean and outside ready for collection on the day of delivery product will fit through your door before using this option. (Postcode dependent, ground floor only, no steps)
    The GR Series ice Flaker  can be coupled with an S Series storage Bin allowing you to tailor the storage bin to your requirements.
    • Max.production: 390 kg production per 24 hours.
    • Bin not included 
    • Can be coupled to any GR Series storage bin.
    • Classic Flake ice
    • Proven and reliable vertical evaporator production system.
    • AISI304 stainless steel construction
    • Manufactured in Europe
    •  Condensing unit, can run in ambients up to 43°c.
    • Built in self cleaning cycle.
    • Can be double stacked where high volumes of ice are required.
    • 2 year parts only warranty.
    • Dimensions (D.W.H: 550 x 675 x 800mm) 
    • Free Kerb – Side Delivery : UK mainland only
                                         Stock: please ring our team 01480 463938
    Special Order:
    This is a special order item and will carry a longer lead time than normal, please check with our sales department before ordering.
                                          
                                        
     
  • Models: B165 A (Air Cooled) / B165 W (Water Cooled)
    Berries Series R290 Refrigerant Berries Series: New range of granular icemakers, with capacity up to 1.000 Kg/day. Granular ice is generated by a vertical cylindrical evaporator, with a screw conveyor, that scrapes the internal surface of the ice pulling it to the outlet of the machine, where ice-crunching system is located. This system guarantees even ice quality and a minimal residual water. The Berries line includes self-contained models and bin-combined versions, to be paired to the vast selection of Icematic bins.
    The Ice: Granular ice is an asset in many sectors, thanks to its multiple uses: from food conservation and display, to cocktails preparation, to applications is SPAs, in the world of cosmetics, in medical and hospital environments. This type of very wet ice is particularly appreciated also in the bakery sector. Granular ice is very easy to handle, stock and weigh. Its peculiarity is the high residual-water contain that, depending on model, may vary from 25% to 15%.
    My Ice App as standard Stainless steel body Easy inspectionable interior Capacitive touch control for stand-by and reset Compatibility with Icematic storage bins USB access with parameters memory Please note that it does not come with a UK 13amp plug Optional extras: Ozone sanitization, Cleaning kit, Legs kit, Drain-pump kit, Special voltages - please contact us for details Adjustable ice humidity via MyIce app.

    Product Details

    External Dimensions: 570mm W x 545mm D x 535mm H Standard Voltage: 220-240V/1N/50Hz Production per 24hr*: B165 A (Air Cooled): 130kg / B165 W (Water Cooled): 118kg
    • Adaptor cover required.
    • Replacement for F120 Modular ice Flaker:
    • Imported from Italy so please check for availability and lead time,
    • *MUST BE INSTALLED BY A FULLY QUALIFIED REFRIGERATION ENGINEER.THIS IS A COMMERCIAL PRODUCT INTENDED FOR USE ON A COMMERCIAL SITE. WARRANTY TERMS MAY BE AFFECTED IF USED IN A NON-COMMERCIAL ENVIRONMENT. B2B (BUSINESS TO BUSINESS) TERMS APPLY.
    Product Code: ICEB165
  • Models: B125 A (Air Cooled) / B125 W (Water Cooled)
    Berries Series R290 Refrigerant Berries Series: New range of granular icemakers, with capacity up to 1.000 Kg/day. Granular ice is generated by a vertical cylindrical evaporator, with a screw conveyor, that scrapes the internal surface of the ice pulling it to the outlet of the machine, where ice-crunching system is located. This system guarantees even ice quality and a minimal residual water. The Berries line includes self-contained models and bin-combined versions, to be paired to the vast selection of Icematic bins.
    The Ice: Granular ice is an asset in many sectors, thanks to its multiple uses: from food conservation and display, to cocktails preparation, to applications is SPAs, in the world of cosmetics, in medical and hospital environments. This type of very wet ice is particularly appreciated also in the bakery sector. Granular ice is very easy to handle, stock and weigh. Its peculiarity is the high residual-water contain that, depending on model, may vary from 25% to 15%.
    My Ice App as standard Stainless steel body Easy inspectionable interior Capacitive touch control for stand-by and reset Compatibility with Icematic storage bins USB access with parameters memory Please note that it does not come with a UK 13amp plug Optional extras: Ozone sanitization, Cleaning kit, Legs kit, Drain-pump kit, Special voltages - please contact us for details Adjustable ice humidity via MyIce app.

    Product Details

    External Dimensions: 570mm W x 545mm D x 535mm H Standard Voltage: 220-240V/1N/50Hz Production per 24hr*: B125 A (Air Cooled): 130kg / B125 W (Water Cooled): 118kg
    • Adaptor cover required.
    • Replacement for F120 Modular ice Flaker:
    • Imported from Italy so please check for availability and lead time,
    • *MUST BE INSTALLED BY A FULLY QUALIFIED REFRIGERATION ENGINEER.THIS IS A COMMERCIAL PRODUCT INTENDED FOR USE ON A COMMERCIAL SITE. WARRANTY TERMS MAY BE AFFECTED IF USED IN A NON-COMMERCIAL ENVIRONMENT. B2B (BUSINESS TO BUSINESS) TERMS APPLY.
    Product Code: ICEB125
  • Hoshizaki CM-50KE-HC Self Contained Cubelet Ice Maker

    Production: 55kg/24hrs.

    • Standard cube 21x21x14mm

    Storage: 18kg                                 

    Hoshizaki CM ice makers produce cubelet ice. In cocktails, the dry and hard ice cubelets are the ideal cooling agent, as they deliver just the right amount of dilution, especially for strong spirited drinks, for example, Mojitos and Tiki Cocktails. The ice maker's extruding head performs a high compression to yield harder and drier cubelets, combining the characteristics of nugget and cube ice.
    • Has a worktime-based replacement system, which can be monitored with an intuitive control display for preventive maintenance.
    • Automated water circuit rinse cycle to avoid harmful mineral residues from clogging the hydraulic system and maintaining top sanitary conditions.
    • Uses carbon graphite bushings instead of conventional ball bearings allows the machine to work entirely without grease.
    • Prevents wear and tear, while the water-lubricated bearings protect the system from unpleasant calcification and bacterial contamination.Hoshizak
     
    SKU HOSO502-1
    Warranty 2 Years Parts & Labour
    Manufacturer Hoshizaki
    Width (mm) 498
    Depth (mm) 570
    Height (mm) 697
    Dimensions (mm) W498 x D570 x H697
    Product Weight (Kg) 49kg
    Packed Weight (Kg) 58kg
    Gross Capacity 18kg
    Colour Stainless Steel
    Ice Type Cubed Ice
    Output 55kg per 24hrs
    Power Supply 13 Amp Plug
    Voltage 240V
  •        ALL ICE MACHINES ARE NOW HYDRO CARBON (HC)
    • Production 125kg of ice in 24 Hours Storage Bin Capacity 57kg
    • Also available as FM-120KE50-HCN (Nugget Ice)
    • High Grade Stainless Steel
    • The FM-120KE-HCN uses refrigerant R290
    • This natural refrigerant is not only climate-friendly but also boosts the machine when it comes to performance and production capacity. 
    • Recommended Water filter set 4HC-H single
    • Gravity Drainage
    • Refrigerant R 290
    • 2 Years Parts and Labour Warranty as Standard
    External Dimensions (mm): H 800 x W 940 x D 600 (legs included) Free Kerb – Side Delivery : UK mainland only Product Code: HOSN35 Before ordering;  CONTACT US FOR AVAILABILITY.  
  •        ALL ICE MACHINES ARE NOW HYDRO CARBON (HC)
    • Production 125kg of ice in 24 Hours Storage Bin Capacity 26kg
    • High Grade Stainless Steel
    • The FM-120KE-HCN uses refrigerant R290
    • This natural refrigerant is not only climate-friendly but also boosts the machine when it comes to performance and production capacity. 
    • Recommended Water filter 4HC-H single
    • Gravity Drainage
    • Refrigerant R 290
    • 2 Years Parts and Labour Warranty as Standard
    External Dimensions (mm): H 800 x W 640 x D 600 (legs included) Free Kerb – Side Delivery : UK mainland only Product Code: HOSN35 Before ordering;  CONTACT US FOR AVAILABILITY.  
  •  Hoshizaki Self Contained FM-80KE-HCN Nugget Ice Maker
    • Production 85kg of ice in 24 Hours Storage Bin Capacity 26kg
    • Flake ice applications: food processing, fish and fresh produce display, organ transportation in medical arena.
    • Nugget ice applications: packaged produce display (bottled beverages and food) and as key ingredient in beverages.
    • Refrigerant R 290
    • High Grade Stainless Steel
    • Recommended Water Filter Hoshizaki 4 HC-H Single Filter
    • Gravity Drainage
    • 2 Years Parts and Labour Warranty as Standard
    External Dimensions (mm): H 800 x W 640 x D 600 (legs included) Free Kerb – Side Delivery : UK mainland only Product Code: HOSO35                          Available from stock
  • The Scotsman EF 207 AS OX is our most popular ice flaker for fisheries  the medical and science industry.
    • Easy Fit Model With Easy-Fit series you may place your ice-maker just where you need it, even remove the legs to fit it under-counter. Drainage height or distance are no longer a problem. Thanks to PWD technology (Progressive Water Discharge) that is standard on the EC easy-fit range.
    The slow-melting ice flakes produced are also perfect for cold treatment in physiotherapy. The built-in bin stores up to 40kg.
    • 122kg of flake ice in 24 Hour Production
    • 40kg Storage Bin Capacity.
    • Produces granular shape ice flakes, 75% hardness
    • Electronically controlled operation, with self-diagnostic functions withexternal alarm lights providing operational information for early alert andfast diagnosis of operating issues
    • External Components constructed from corrosion-resistant stainless steelcrafted for optimal aesthetic appeal through superior fit and finish
    • Ergonomically convenient, slanted & disappearing storage bin door
    • Front access for easier naintenance
    • Front-in, front-out airflow allows for built-in installations
    • Also available as AF87 LAB: specifically designed to be used with demine-ralized and distilled water.
    • XSafe: natural sanitation system, integrated inside the ice maker and ope- rating automatically 24/7 to keep equipment clean & safe.
    • Grade 304 Stainless Steel
    • Easy-Fit System (Pumped Waste Discharge)
    • Refrigerant: R290
    • Recommended Water Filter : HF60s
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
    • Includes 2 Years Warranty Parts Only
    • Free Kerb – Side Delivery : UK mainland only           In STOCK
      External Dimensions (mm): H 789 (with legs 873) x W 950 x D 605 Installation Available. eMail sales@ice2o.co.uk Product Code: SCO132  
  • The Scotsman AF 127 AS OX is our most popular ice flaker for fisheries  the medical and science industry. The slow-melting ice flakes produced are also perfect for cold treatment in physiotherapy. The built-in bin stores up to 40kg.
    • 122kg of flake ice in 24 Hour Production
    • 40kg Storage Bin Capacity.
    • Produces granular shape ice flakes, 75% hardness
    • Electronically controlled operation, with self-diagnostic functions withexternal alarm lights providing operational information for early alert andfast diagnosis of operating issues
    • External Components constructed from corrosion-resistant stainless steelcrafted for optimal aesthetic appeal through superior fit and finish
    • Ergonomically convenient, slanted & disappearing storage bin door
    • Front access for easier naintenance
    • Front-in, front-out airflow allows for built-in installations
    • Also available as AF LAB: specifically designed to be used with demine-ralized and distilled water.
    • XSafe: natural sanitation system, integrated inside the ice maker and ope- rating automatically 24/7 to keep equipment clean & safe.
    • Grade 304 Stainless Steel
    • Gravity Drainage
    • Refrigerant: R290
    • Recommended Water Filter : HF60s
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
    • Includes 2 Years Warranty Parts Only
    • Free Kerb – Side Delivery : UK mainland only           In STOCK
      External Dimensions (mm): H 789( with legs 873) x W 950 x D 605 Installation Available. eMail sales@ice2o.co.uk Product Code: SCO132  
  • Taking flaked Ice production to an industrial scale the SPH range offers a huge range of production quantities with just as many storage bin options! Built from a 441 stainless steel exterior & food safe plastic interior, The units front vented design are perfect for building in to existing structures, while remaining easily serviceable. The SPH80 in particular, is capable of producing up to 70kg off flaked ice per 24hrs.
    • SIMAG: Self contained Ice  Flaker: SIGMA:SPH 80
    • Production 70kg of flake ice in 24 Hours
    • Bin Capacity 25kg
    • High Grade 441 Stainless Steel
    • Easy Front-Access Condenser Air Filter do-it-yourself cleaning operation that saves time and money and makes your ice maker last longer
    • Front vented - can be built in
    • Electronic controls
    • Produces flaked ice
    • Food safe plastic interior
    • Air cooled (water cooled version avaliable - POA)
    • Easily accessible components
    • Power Supply: 13amp supply
    • Decibels: 60dBA
    • Weight (kg): 60.00
    • Refrigerant: R 290
    • Gravity Drainage
    • Recommended Water Filter : HF20s
    • Includes 3 Year Parts Only Warranty
    • Free Kerb – Side Delivery : UK mainland only
                                                  Available from stock  

    External Dimensions (mm)

    H 880 (legs + 115) x W 529 x D 626mm.

  •  Scotsman MXF-1237 AS OX Modular Flake ice machine.

       Scotsman MXF-1237 produces 560/kg 24/hrs
       Designed to be fitted to a separate storage bin.
        Specification Overview:

    Scotsman Logo

    Modular flaked ice machine, produces 560Kg every 24hrs, designed to be fitted to a separate storage bin. Ideal for Food Manufacturers, Fishing Industry, Medical Therapy and Laboratories
    Specification Overview
    Model Scotsman MXF 1237 (head only)
    Dimensions (W x D x H) 765 x 615 x 650cm
    Max production / 24hrs 560 Kg
    Recommended ice bin SB 530s (243Kg)
    Ice type Superflake – 15% residual water
    Unit weight 97 Kg
    Water consumption (A) 15.8Litre/hr
    Energy Consumption (A) 45.0 kWh/24hrs
    Refrigeration R290
    Voltage 230v / 50hz / 1ph
    Fuse / CB rating 10 amp
    Recommended water filter 3M HF60-S
     

    Scotsman Flake Ice

    Flaked Ice is the most natural shape. Extruded at a temperature just below zero degrees. Scotsman flaked ice suits a variety of applications including foodservice, fisheries, laboratories and industry. Flake Ice offers the best solution for maintaining refrigerated perishables where long-lasting freshness and natural appearance need to be guaranteed. Scotsman’s flaked ice’s ability to rapidly cool items immersed in it makes it the ideal ice choice for medical, research and laboratory applications  

    Features of the Scotsman MXF 1237 AS OX include

    • Top Materials: AISI 304 Stainless steel and new removable grid • Core Ice System: Stable evaporator system (Axial load) • New Core Evaporator: Highly balanced auger (double fly system) • New Gear motor: Evaporator stability improved and noise free • Innovative Ice Breaker: Very dry flake ice – 12% of water contents • Durable Operations: High efficiency and better performance • Easy to Clean: Facilitated cleaning process and XSafe as standard • New High-tech Water Sump with easy regulation system • New ice level sensor: for seamless operations • New Display: Touch & Smart • XWave: New App with improved electronics and programming
    • Recommended Water Filter HF60 -S
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
      • Includes 2 Year Warranty Parts Only       NOW IN STOCK
      • Product Code: SCOMXF1237-1-1
       
     

             
  •  Scotsman MXF-1027 AS OX Modular Flake ice machine.

       Scotsman MXF-1027 produces 500/kg 24/hrs
       Designed to be fitted to a separate storage bin.
        Specification Overview:

    Scotsman Logo

    Modular flaked ice machine, produces 500Kg every 24hrs, designed to be fitted to a separate storage bin. Ideal for Food Manufacturers, Fishing Industry, Medical Therapy and Laboratories
    Specification Overview
    Model Scotsman MXF 1027 (head only)
    Dimensions (W x D x H) 560 x 615 x 735 cm
    Max production / 24hrs 500 Kg
    Recommended ice bin SB 530s (243Kg)
    Ice type Superflake – 15% residual water
    Unit weight 80 Kg
    Water consumption (A) 13.1 Litre/hr
    Energy Consumption (A) 35.5 kWh/24hrs
    Refrigeration R290
    Voltage 230v / 50hz / 1ph
    Fuse / CB rating 10 amp
    Recommended water filter 3M HF60-S
     

    Scotsman Flake Ice

    Flaked Ice is the most natural shape. Extruded at a temperature just below zero degrees. Scotsman flaked ice suits a variety of applications including foodservice, fisheries, laboratories and industry. Flake Ice offers the best solution for maintaining refrigerated perishables where long-lasting freshness and natural appearance need to be guaranteed. Scotsman’s flaked ice’s ability to rapidly cool items immersed in it makes it the ideal ice choice for medical, research and laboratory applications  

    Features of the Scotsman MXF 1027 include

    • Top Materials: AISI 304 Stainless steel and new removable grid • Core Ice System: Stable evaporator system (Axial load) • New Core Evaporator: Highly balanced auger (double fly system) • New Gear motor: Evaporator stability improved and noise free • Innovative Ice Breaker: Very dry flake ice – 12% of water contents • Durable Operations: High efficiency and better performance • Easy to Clean: Facilitated cleaning process and XSafe as standard • New High-tech Water Sump with easy regulation system • New ice level sensor: for seamless operations • New Display: Touch & Smart • XWave: New App with improved electronics and programming
    • Recommended Water Filter HF60 -S
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
      • Includes 2 Year Warranty Parts Only       NOW IN STOCK
      • Product Code: SCOMXF1027-1-1
       
     

             
  •  Scotsman MXF-627 AS OX Modular Flake ice machine.

       Scotsman MXF-627 produces 300/kg 24/hrs
       Designed to be fitted to a separate storage bin.
        Specification Overview:

    Scotsman Logo

    Modular flaked ice machine, produces 300Kg every 24hrs, designed to be fitted to a separate storage bin. Ideal for Food Manufacturers, Fishing Industry, Medical Therapy and Laboratories
    Specification Overview
    Model Scotsman MXF 627 (head only)
    Dimensions (W x D x H) 560 x 615 x 600 cm
    Max production / 24hrs 300 Kg
    Recommended ice bin SB 293s (123Kg)
    Ice type Superflake – 15% residual water
    Unit weight 51 Kg
    Water consumption (A) 9.0 Litre/hr
    Energy Consumption (A) 24.7 kWh/24hrs
    Refrigeration R290
    Voltage 230v / 50hz / 1ph
    Fuse / CB rating 10 amp
    Recommended water filter 3M HF60-S
     

    Scotsman Flake Ice

    Flaked Ice is the most natural shape. Extruded at a temperature just below zero degrees. Scotsman flaked ice suits a variety of applications including foodservice, fisheries, laboratories and industry. Flake Ice offers the best solution for maintaining refrigerated perishables where long-lasting freshness and natural appearance need to be guaranteed. Scotsman’s flaked ice’s ability to rapidly cool items immersed in it makes it the ideal ice choice for medical, research and laboratory applications  

    Features of the Scotsman MXF 627 AS OX include

    • Top Materials: AISI 304 Stainless steel and new removable grid • Core Ice System: Stable evaporator system (Axial load) • New Core Evaporator: Highly balanced auger (double fly system) • New Gear motor: Evaporator stability improved and noise free • Innovative Ice Breaker: Very dry flake ice – 12% of water contents • Durable Operations: High efficiency and better performance • Easy to Clean: Facilitated cleaning process and XSafe as standard • New High-tech Water Sump with easy regulation system • New ice level sensor: for seamless operations • New Display: Touch & Smart • XWave: New App with improved electronics and programming
    • Recommended Water Filter HF60 -S
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
      • Includes 2 Year Warranty Parts Only       NOW IN STOCK
      • Product Code: SCOMXF627-1-1
       
     

             
  •  Scotsman MXF-427 AS OX Modular Flake ice machine.

       Scotsman MXF-427 produces 220/kg 24/hrs
       Designed to be fitted to a separate storage bin.
        Specification Overview:

    Scotsman Logo

    Modular flaked ice machine, produces 220Kg every 24hrs, designed to be fitted to a separate storage bin. Ideal for Food Manufacturers, Fishing Industry, Medical Therapy and Laboratories
    Specification Overview
    Model Scotsman MXF 427 (head only)
    Dimensions (W x D x H) 560 x 615 x 600 cm
    Max production / 24hrs 220 Kg
    Recommended ice bin SB 293s (123Kg)
    Ice type Superflake – 15% residual water
    Unit weight 44 Kg
    Water consumption (A) 3.9 Litre/hr
    Energy Consumption (A) 10.6 kWh/24hrs
    Refrigeration R290
    Voltage 230v / 50hz / 1ph
    Fuse / CB rating 10 amp
    Recommended water filter 3M HF60-S
     

    Scotsman Flake Ice

    Flaked Ice is the most natural shape. Extruded at a temperature just below zero degrees. Scotsman flaked ice suits a variety of applications including foodservice, fisheries, laboratories and industry. Flake Ice offers the best solution for maintaining refrigerated perishables where long-lasting freshness and natural appearance need to be guaranteed. Scotsman’s flaked ice’s ability to rapidly cool items immersed in it makes it the ideal ice choice for medical, research and laboratory applications  

    Features of the Scotsman MXF 427 include

    • Top Materials: AISI 304 Stainless steel and new removable grid • Core Ice System: Stable evaporator system (Axial load) • New Core Evaporator: Highly balanced auger (double fly system) • New Gear motor: Evaporator stability improved and noise free • Innovative Ice Breaker: Very dry flake ice – 12% of water contents • Durable Operations: High efficiency and better performance • Easy to Clean: Facilitated cleaning process and XSafe as standard • New High-tech Water Sump with easy regulation system • New ice level sensor: for seamless operations • New Display: Touch & Smart • XWave: New App with improved electronics and programming
    • Recommended Water Filter HF60 -S
      • Includes 2 Year Warranty Parts Only       NOW IN STOCK
      • Free kerb side delivery
      • Product Code: SCOMXF427-1-1
       
     

             
  •  Scotsman MXF-327 AS OX Modular Flake ice machine.

       Scotsman MXF-327 produces 133/kg 24/hrs

       Designed to be fitted to a separate storage bin.
               Standard Storage Bin (129kg)     Specification Overview:

    Scotsman Logo

    Modular flaked ice machine, produces 113Kg every 24hrs, designed to be fitted to a separate storage bin. Ideal for Food Manufacturers, Fishing Industry, Medical Therapy and Laboratories
    Specification Overview
    Model Scotsman MXF 327 (head only)
    Dimensions (W x D x H) 560 x 615 x 450 cm
    Max production / 24hrs 113 Kg
    Recommended ice bin SB 293s (123Kg)
    Ice type Superflake – 15% residual water
    Unit weight 44 Kg
    Water consumption (A) 3.9 Litre/hr
    Energy Consumption (A) 10.6 kWh/24hrs
    Refrigeration R290
    Voltage 230v / 50hz / 1ph
    Fuse / CB rating 10 amp
    Recommended water filter 3M HF20-S
     

    Scotsman Flake Ice

    Flaked Ice is the most natural shape. Extruded at a temperature just below zero degrees. Scotsman flaked ice suits a variety of applications including foodservice, fisheries, laboratories and industry. Flake Ice offers the best solution for maintaining refrigerated perishables where long-lasting freshness and natural appearance need to be guaranteed. Scotsman’s flaked ice’s ability to rapidly cool items immersed in it makes it the ideal ice choice for medical, research and laboratory applications  

    Features of the Scotsman MXF 327 include

    • Top Materials: AISI 304 Stainless steel and new removable grid • Core Ice System: Stable evaporator system (Axial load) • New Core Evaporator: Highly balanced auger (double fly system) • New Gear motor: Evaporator stability improved and noise free • Innovative Ice Breaker: Very dry flake ice – 12% of water contents • Durable Operations: High efficiency and better performance • Easy to Clean: Facilitated cleaning process and XSafe as standard • New High-tech Water Sump with easy regulation system • New ice level sensor: for seamless operations • New Display: Touch & Smart • XWave: New App with improved electronics and programming
    • Recommended Water Filter HF60 -S
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
      • Includes 2 Year Warranty Parts Only        IN STOCK
      • Product Code: SCOMXF327-1-1
       
     

             
  •  

    Prodis GR135 Flaked Ice Maker 164kg

    164kg/24 Hour Production with 40kg Storage

    The Prodis GR135 ice flaker is ideal for locations that require a constant supply of flaked ice such as supermarkets, fish markets and gyms. The unit produces up to 135kg of flaked ice per day and has an integrated 60kg storage bin for easy and quick installation. The GR series is fully electro-mechanical for high reliability and easy maintenance. A tropicalised condensing unit makes the GR series suitable for use in ambient temperatures of up to 43°c to cope in even the most demanding environments.
    • 135kg production per 24 hours
    • 40kg storage bin
    • Low moisture content flaked ice
    • Heavy duty auger production system
    • Proven and reliable vertical evaporator production system
    • AISI304 Stainless Steel Construction
    • Tropicalied condensing unit, can run in ambients up to 43°C
    • Built in self cleaning cycle
    Optional Delivery Services: Unpack and position - 2 man delivery crew will bring the product into your premises, unpack and position the unit and remove and dispose of the packaging. The product will need to be delivered into your premises in its packaging so please ensure the packaged product will fit through your door before using this option. (Postcode dependent, ground floor only, no steps)
    Uplift and disposal service - The delivery team will uplift and dispose of your old product at the same time as delivering your new cabinet, the old unit must be empty, clean and outside ready for collection on the day of delivery product will fit through your door before using this option. (Postcode dependent, ground floor only, no steps)
     
    • Max.production: 135 kg production per 24 hours.
    • Bin not including 40Kg
    • Classic Flake ice
    • Proven and reliable vertical evaporator production system.
    • AISI304 stainless steel construction
    • Manufactured in Europe
    •  Condensing unit, can run in ambients up to 43°c.
    • Built in self cleaning cycle.
    • Can be double stacked where high volumes of ice are required.
    • Amps 13
    • Refrigeration System R290
    • 2 year parts only warranty.
    • Dimensions (D.W.H: 550 x 515 x 1355mm)  
    • Free Kerb – Side Delivery : UK mainland only
    PRODIS : GR 135                                          
                                        Available from stock
     
  • Prodis GR565 Flaked Ice Maker

    565kg/24 Hour Production with optional storage Bin

    The Prodis GR565 ice flaker is ideal for locations that require a constant supply of flaked ice such as supermarkets, fish markets and gyms. The unit produces up to 565kg off flaked ice per day.  The GR series is fully electro-mechanical for high reliability and easy maintenance. A tropicalised condensing unit makes the GR series suitable for use in ambient temperatures of up to 43°c to cope in even the most demanding environments.
    • 565kg production per 24 hours
    • kg storage bin not including
    • Low moisture content flaked ice
    • Heavy duty auger production system
    • Proven and reliable vertical evaporator production system
    • AISI304 Stainless Steel Construction
    • Tropicalied condensing unit, can run in ambients up to 43°C
    • Built in self cleaning cycle
    Optional Delivery Services: Unpack and position – 2 man delivery crew will bring the product into your premises, unpack and position the unit and remove and dispose of the packaging. The product will need to be delivered into your premises in its packaging so please ensure the packaged product will fit through your door before using this option. (Postcode dependent, ground floor only, no steps)
    Uplift and disposal service – The delivery team will uplift and dispose of your old product at the same time as delivering your new cabinet, the old unit must be empty, clean and outside ready for collection on the day of delivery product will fit through your door before using this option. (Postcode dependent, ground floor only, no steps)
    The GR Series ice Flaker  can be coupled with an S Series storage silo allowing you to tailor the storage bin to your requirements.
    • Max.production: 565 kg production per 24 hours.
    • Bin not included 
    • Can be coupled to any GR Series storage bin.
    • Classic Flake ice
    • Proven and reliable vertical evaporator production system.
    • AISI304 stainless steel construction
    • Manufactured in Europe
    •  Condensing unit, can run in ambients up to 43°c.
    • Built in self cleaning cycle.
    • Can be double stacked where high volumes of ice are required.
    • 2 year parts only warranty.
    • Dimensions (D.W.H: 550 x 675 x 800mm) 
    • Free Kerb – Side Delivery : UK mainland only
                                                                                    Stock: please ring
    Special Order:
    This is a special order item and will carry a longer lead time than normal, please check with our sales department before ordering.
                                          
                                        
     
  • The Prodis: GR 220 Modular heavy duty Flake Ice  maker produces crushed-flake shaped ice which are perfect for high demand venues such as, Fisheries-fast food display- restaurant. The GR Series ice Flaker  can be coupled with an S Series storage silo allowing you to tailor the storage bin to your requirements.
    • Max.production: 220 kg production per 24 hours.
    • Bin not included 
    • Can be coupled to any GR Series storage bin.
    • Classic Flake ice
    • Proven and reliable vertical evaporator production system.
    • AISI304 stainless steel construction
    • Manufactured in Europe
    •  Condensing unit, can run in ambients up to 43°c.
    • Built in self cleaning cycle.
    • Can be double stacked where high volumes of ice are required.
    • 2 year parts only warranty.
    • Dimensions (D.W.H: 550 x 515 x 575mm)
    PRODIS : GR 220                                           
                                        Available from stock
     
  • Features of the Scotsman MF 57 including:

    • Hermetic compressor. Stainless steel auger and freezing cylinder (evaporator). Equipped with an electronic control board. • Ice breaker made in specially strengthened alloy, allowing for greater extrusion pressure to deliver a dryer-quality of ice (85% dry). • Long-lasting stainless steel ball-bearings. Double protection – electronic rotation sensor and drive coupling – on gear motor and gear reducer. • Low-water sensor protection on refrigeration and gear motor system. Optical ice level sensor for machine shut down. • Stainless steel side panels in scotch-brite finish, with rounded corners for enhanced ease of cleaning and aesthetics. • Side panels are removable on all four sides to ease maintenance and after-sales service operations. • PS plastic top cover. • Reduced height to ease installation. • XSafe: natural sanitation system, integrated inside the ice maker and operating automatically 24/7 to keep equipment clean & safe.  
    • Production 410kg of Flake ice in 24 Hour
      Modular flaked ice machine, produces 410Kg every 24hrs, designed to be fitted to a separate storage bin. Ideal for Food Manufacturers, Fishing Industry, Medical Therapy and Laboratories
      Specification Overview:
      Model
      Scotsman MF57 (head only)
      Dimensions (W x D x H)
      538 x 663 x 785 mm
      Max production / 24hrs
      410 Kg
      Recommended ice bin
      SB 393 (181Kg) or SB 530 (243Kg)
      Ice type
      Superflake – 15% residual water
      Unit weight
      94 Kg
      Water consumption (A)
      11.7 Litre/hr
      Energy Consumption (A)
      30.4 kWh/24hrs
      Refrigeration
      R290
      Voltage
      230v / 50hz / 1ph
      Fuse / CB rating
      16 amp
      Recommended water filter
      3M HF60-S

                Recommended water filter 3M HF60-S:

    We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call. Product Code: SCOMF57
    • Icematic B200c New” Berries” Range.
    • 210kg of ice in 24 Hour Production
    • 50kg Storage Bin Capacity
    • No Separate Storage Bin Required
    • R290 Refrigerant
    • Product Details

      External Dimensions: 700mm W x 650mm D x 995mm H Standard Voltage: 220-240V/1N/50Hz Production per 24hr*: B200C A (Air Cooled): 210kg / B200C W (Water Cooled): 195kg Bin Capacity: 50kg   Models: B200C A (Air Cooled) / B200C W (Water Cooled)   Berries Series My Ice App as standard Stainless steel body Easy inspectionable interior Capacitive touch control for stand-by and reset USB access with parameters memory Please note that it does not come with a UK 13amp plug Optional extras: Ozone sanitization, Cleaning kit, Legs kit, Drain-pump kit, Special voltages – please contact us for details Adjustable ice humidity via MyIce app.
    • Ice Scoop & Service Hoses Supplied
    • Standard Manufacturer 's 1 Year parts Warranty
    • Free Kerb – Side Delivery : UK mainland only
    • Net Weight: 65kg
    • Berries Series: New range of granular icemakers, with capacity up to 1.000 Kg/day. Granular ice is generated by a vertical cylindrical evaporator, with a screw conveyor, that scrapes the internal surface of the ice pulling it to the outlet of the machine, where ice-crunching system is located. This system guarantees even ice quality and a minimal residual water. The Berries line includes self-contained models and bin-combined versions, to be paired to the vast selection of Icematic bins.
      The Ice: Granular ice is an asset in many sectors, thanks to its multiple uses: from food conservation and display, to cocktails preparation, to applications is SPAs, in the world of cosmetics, in medical and hospital environments. This type of very wet ice is particularly appreciated also in the bakery sector. Granular ice is very easy to handle, stock and weigh. Its peculiarity is the high residual-water contain that, depending on model, may vary from 25% to 15%.
      Replacement for F200 C *Specifications as per 2025 brochure. Imported from Italy so please check for availability and lead time *MUST BE INSTALLED BY A FULLY QUALIFIED REFRIGERATION ENGINEER. THIS IS A COMMERCIAL PRODUCT INTENDED FOR USE ON A COMMERCIAL SITE. WARRANTY TERMS MAY BE AFFECTED IF USED IN A NON-COMMERCIAL ENVIRONMENT. B2B (BUSINESS TO BUSINESS) TERMS APPLY.
    External Dimensions (mm): H 995 x W 700 x D 650 ( Feet Included in Height) Product Code: ICEN200c
    • Icematic B160c  New” Berries” Range.
    • 165kg of flake ice in 24 Hour Production
    • 50kg Storage Capacity.

      Product Details

      External Dimensions: 700mm W x 650mm D x 995mm H Standard Voltage: 220-240V/1N/50Hz Production per 24hr*: B160C A (Air Cooled): 165kg / B160C W (Water Cooled): 168kg Bin Capacity: 50kg Models: B160C A (Air Cooled) / B160C W (Water Cooled) Berries Series R290 Refrigerant My Ice App as standard Stainless steel body Easy inspectionable interior Capacitive touch control for stand-by and reset USB access with parameters memory Please note that it does not come with a UK 13amp plug Optional extras: Ozone sanitization, Cleaning kit, Legs kit, Drain-pump kit, Special voltages - please contact us for details Adjustable ice humidity via MyIce app
    • Recommended Water Filter ; HF20s
    • Standard Manufacturer's 2 Year Parts Warranty
    External Dimensions (mm): H 995 x W 700 x D 650 (95mm Feet Included in Height) Berries Series: New range of granular icemakers, with capacity up to 1.000 Kg/day. Granular ice is generated by a vertical cylindrical evaporator, with a screw conveyor, that scrapes the internal surface of the ice pulling it to the outlet of the machine, where ice-crunching system is located. This system guarantees even ice quality and a minimal residual water. The Berries line includes self-contained models and bin-combined versions, to be paired to the vast selection of Icematic bins.
    The Ice: Granular ice is an asset in many sectors, thanks to its multiple uses: from food conservation and display, to cocktails preparation, to applications is SPAs, in the world of cosmetics, in medical and hospital environments. This type of very wet ice is particularly appreciated also in the bakery sector. Granular ice is very easy to handle, stock and weigh. Its peculiarity is the high residual-water contain that, depending on model, may vary from 25% to 15%.
    Replacement for F160C *Specifications as per 2025 brochure. Imported from Italy so please check for availability and lead time *MUST BE INSTALLED BY A FULLY QUALIFIED REFRIGERATION ENGINEER. THIS IS A COMMERCIAL PRODUCT INTENDED FOR USE ON A COMMERCIAL SITE. WARRANTY TERMS MAY BE AFFECTED IF USED IN A NON-COMMERCIAL ENVIRONMENT. B2B (BUSINESS TO BUSINESS) TERMS APPLY. Product Code: ICEF160c
    • Icematic B130 C New” Berries” Range.
    • 130kg of flake ice in 24 Hour Production
    • 18kg Storage Capacity

      Product Details

      External Dimensions:H 695x W 500 x D 600 (No Feet) Standard Voltage: 220-240V/1N/50Hz Production per 24hr*: B130C A (Air Cooled): 135kg / B130C W (Water Cooled): 168kg Bin Capacity: 50kg Models: B130C A (Air Cooled) / B130C W (Water Cooled) Berries Series My Ice App as standard Stainless steel body Easy inspectionable interior Capacitive touch control for stand-by and reset USB access with parameters memory Please note that it does not come with a UK 13amp plug Optional extras: Ozone sanitization, Cleaning kit, Legs kit, Drain-pump kit, Special voltages – please contact us for details Adjustable ice humidity via MyIce app
    • No Separate Storage Bin Required
    • R290 Refrigerant
    • Ozone Friendly
    • Net Weight: 50kg shipping : 57kg
    • Recommended Water Filter : HF20s
    • Standard Manufacturer 's 2 Year parts Warranty
      Berries Series: New range of granular icemakers, with capacity up to 1.000 Kg/day. Granular ice is generated by a vertical cylindrical evaporator, with a screw conveyor, that scrapes the internal surface of the ice pulling it to the outlet of the machine, where ice-crunching system is located. This system guarantees even ice quality and a minimal residual water. The Berries line includes self-contained models and bin-combined versions, to be paired to the vast selection of Icematic bins.
    The Ice: Granular ice is an asset in many sectors, thanks to its multiple uses: from food conservation and display, to cocktails preparation, to applications is SPAs, in the world of cosmetics, in medical and hospital environments. This type of very wet ice is particularly appreciated also in the bakery sector. Granular ice is very easy to handle, stock and weigh. Its peculiarity is the high residual-water contain that, depending on model, may vary from 25% to 15%.
    Replacement for F130C *Specifications as per 2025 brochure. Imported from Italy so please check for availability and lead time *MUST BE INSTALLED BY A FULLY QUALIFIED REFRIGERATION ENGINEER. THIS IS A COMMERCIAL PRODUCT INTENDED FOR USE ON A COMMERCIAL SITE. WARRANTY TERMS MAY BE AFFECTED IF USED IN A NON-COMMERCIAL ENVIRONMENT. B2B (BUSINESS TO BUSINESS) TERMS APPLY. External Dimensions (mm): H 695x W 500 x D 600 (No Feet) Product Code: ICE130c
    • Icematic B95 C New” Berries” Range.
    • 90kg of flake ice in 24 Hour Production
    • 18kg Storage Capacity
    • No Separate Storage Bin Required
    • Product Details

      External Dimensions:H 694x W 500 x D 597 (No Feet) Standard Voltage: 220-240V/1N/50Hz Production per 24hr*: B90C A (Air Cooled): 90kg / B95C W (Water Cooled): 95kg Bin Capacity: 18kg Models: B95C A (Air Cooled) / B95C W (Water Cooled) Berries Series My Ice App as standard Stainless steel body Easy inspectionable interior Capacitive touch control for stand-by and reset USB access with parameters memory Please note that it does not come with a UK 13amp plug Optional extras: Ozone sanitization, Cleaning kit, Legs kit, Drain-pump kit, Special voltages – please contact us for details Adjustable ice humidity via MyIce app
    • No Separate Storage Bin Required
    • R290 Refrigerant
    • Ozone Friendly
    • Net Weight: 48kg shipping : 55kg
    • Recommended Water Filter : HF20s
    • Standard Manufacturer 's 2 Year parts Warranty
      Berries Series: New range of granular icemakers, with capacity up to 1.000 Kg/day. Granular ice is generated by a vertical cylindrical evaporator, with a screw conveyor, that scrapes the internal surface of the ice pulling it to the outlet of the machine, where ice-crunching system is located. This system guarantees even ice quality and a minimal residual water. The Berries line includes self-contained models and bin-combined versions, to be paired to the vast selection of Icematic bins.
    The Ice: Granular ice is an asset in many sectors, thanks to its multiple uses: from food conservation and display, to cocktails preparation, to applications is SPAs, in the world of cosmetics, in medical and hospital environments. This type of very wet ice is particularly appreciated also in the bakery sector. Granular ice is very easy to handle, stock and weigh. Its peculiarity is the high residual-water contain that, depending on model, may vary from 25% to 15%.
    Replacement for F95 C *Specifications as per 2025 brochure. Imported from Italy so please check for availability and lead time *MUST BE INSTALLED BY A FULLY QUALIFIED REFRIGERATION ENGINEER. THIS IS A COMMERCIAL PRODUCT INTENDED FOR USE ON A COMMERCIAL SITE. WARRANTY TERMS MAY BE AFFECTED IF USED IN A NON-COMMERCIAL ENVIRONMENT. B2B (BUSINESS TO BUSINESS) TERMS APPLY. External Dimensions (mm): H 694x W 500 x D 597 (No Feet) Product Code: ICEF90c
    • Icematic B305 New" Berries" Range.
    • 300kg of flake ice in 24 Hour Production
    • Storage bin not included
    • R290 Refrigerant
    • Unit cooled by air
    • Net Weight: 60kg
    • Use storage bin MG205 - MG305
    • Standard Manufacturer's 2 Year Parts Warranty
    • *MUST BE INSTALLED BY A FULLY QUALIFIED REFRIGERATION ENGINEER.*
    • Adaptor cover required.
    External Dimensions (mm): H 535 x W 670 x D 670 Product Code: ICEB305
  • Out of stock
    • 191kg storage capacity
    • Standard Manufacturer's 2 Year Parts Warranty
    External Dimensions (mm): H 1270 x W 770x D 880 mm Product Code: ICED255
    • Icematic B205 New" Berries" Range.
    • 210kg of flake ice in 24 Hour Production
    • Storage bin not included
    • R290 Refrigerant
    • Unit cooled by air
    • Net Weight:
    • Use storage bin MG205 - MG305
    • Standard Manufacturer's 2 Year Parts Warranty
    • *MUST BE INSTALLED BY A FULLY QUALIFIED REFRIGERATION ENGINEER.*
    • Adaptor cover required.
    External Dimensions (mm): H 535 x W 570 x D 670 Product Code: ICEB205
  • The Scotsman AF87 AS-OX is our most popular ice flaker for the medical and science industry. The slow-melting ice flakes produced are also perfect for cold treatment in physiotherapy. The built-in bin stores up to 25kg.
    • 70kg of flake ice in 24 Hour Production
    • 25kg Storage Bin Capacity.
    • Produces granular shape ice flakes, 75% hardness
    • Electronically controlled operation, with self-diagnostic functions withexternal alarm lights providing operational information for early alert andfast diagnosis of operating issues
    • External Components constructed from corrosion-resistant stainless steelcrafted for optimal aesthetic appeal through superior fit and finish
    • Ergonomically convenient, slanted & disappearing storage bin door
    • Front access for easier naintenance
    • Front-in, front-out airflow allows for built-in installations
    • Also available as AF87 LAB: specifically designed to be used with demine-ralized and distilled water.
    • XSafe: natural sanitation system, integrated inside the ice maker and ope- rating automatically 24/7 to keep equipment clean & safe.
    • Grade 304 Stainless Steel
    • Gravity Drainage
    • Refrigerant: R290
    • Recommended Water Filter : HF20s
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
    • Includes 2 Years Warranty Parts Only
    • Free Kerb – Side Delivery : UK mainland only           In STOCK
      External Dimensions (mm): H 800(legs + 93) x W 535 x D 626 Installation Available. eMail sales@ice2o.co.uk Product Code: SCO132 Suitable Alternative: The Ice-o-Matic UCF-165A is a suitable alternative to the popular Scotsman AF87 Flake Ice Maker. It's size, production rate and storage are very similar and it is more readily available at this time.
  • The Hoshizaki FM-750AKE-HC -SB modular flake ice maker.
    • Produces either Flake or Nugget (-N) ice, special order only.
    • Can produce up to 750kg of ice (flake) and 490kg (nugget) per 24 hours (AT.10°C.WT.10°C).
    • Flake ice applications: food processing, fish and fresh produce display, organ transportation in medical arena.
    • Nugget ice applications: packaged produce display (bottled beverages and food) and as key ingredient in beverages.
    • Efficient ice making process due to Hoshizaki’s unique FM auger system. Utilises all water brought into the machine; therefore water consumption is equal to ice production.
    • Auger is made of double hardened stainless steel. Combined with carbon bearings, they work optimally in a tough and wet environment. Benefits include: longer product life expectancy and reduced maintenance costs.
    • Electronically controlled to ensure an optimised ice making process under varying circumstances without the need for physical adjustments. Quality of ice is always consistent.
    • Main characteristic of Hoshizaki’s Flake ice is that ‘freeze- burn’ is prevented when displaying fresh fish or produce.
    • Comes with 2 Years Parts & Labour Warranty
    • Recommended Water Filter Hoshizaki 4 HC-H Triple Filter
    • Dimensions: 762mm (width) x 700mm (depth) x 780mm (height)
    • Suitable with Hoshiaki Ice Storage Bin B-340SA or the Hoshiaki Ice Storage Bin B-210SA 
    Free Kerb – Side Delivery : UK mainland only Product Code: HOSFM750 Before ordering;  CONTACT US FOR AVAILABILITY
  • The Hoshizaki FM-1200AKE-SB modular flake ice maker.
    • Produces either Flake or Nugget (-N) ice, special oder only.
    • Members of the Emerald Class, Hoshizaki’s new range of climate friendly ice makers.
    • Can produce up to 1200kg of ice (flake) and 1180kg (nugget) per 24 hours (AT.10°C.WT.10°C).
    • Flake ice applications: food processing, fish and fresh produce display, organ transportation in medical arena.
    • Nugget ice applications: packaged produce display (bottled beverages and food) and as key ingredient in beverages.
    • Efficient ice making process due to Hoshizaki’s unique FM auger system. Utilises all water brought into the machine; therefore water consumption is equal to ice production.
    • Auger is made of double hardened stainless steel. Combined with carbon bearings, they work optimally in a tough and wet environment. Benefits include: longer product life expectancy and reduced maintenance costs.
    • Electronically controlled to ensure an optimised ice making process under varying circumstances without the need for physical adjustments. Quality of ice is always consistent.
    • Main characteristic of Hoshizaki’s Flake ice is that ‘freeze- burn’ is prevented when displaying fresh fish or produce.
    • Comes with 2 Years Parts & Labour Warranty
    • Recommended Water Filter Hoshizaki 4 HC-H Triple Filter
    • Dimensions: 762mm (width) x 700mm (depth) x 780mm (height)
    • Suitable with Hoshiaki Ice Storage Bin B-340SA or the Hoshiaki Ice Storage Bin B-210SA
                Free Kerb – Side Delivery : UK mainland only Product Code: HOSFM1200 Before ordering;  CONTACT US FOR AVAILABILITY
  • The Hoshizaki FM-1800AKE-SB modular flake ice maker.
    • Produces either Flake or Nugget (-N) ice, special oder only.
    • Can produce up to 1800kg of ice (flake) and 1700kg (nugget) per 24 hours (AT.10°C.WT.10°C).
    • Flake ice applications: food processing, fish and fresh produce display, organ transportation in medical arena.
    • Nugget ice applications: packaged produce display (bottled beverages and food) and as key ingredient in beverages.
    • Efficient ice making process due to Hoshizaki’s unique FM auger system. Utilises all water brought into the machine; therefore water consumption is equal to ice production.
    • Auger is made of double hardened stainless steel. Combined with carbon bearings, they work optimally in a tough and wet environment. Benefits include: longer product life expectancy and reduced maintenance costs.
    • Electronically controlled to ensure an optimised ice making process under varying circumstances without the need for physical adjustments. Quality of ice is always consistent.
    • Main characteristic of Hoshizaki’s Flake ice is that ‘freeze- burn’ is prevented when displaying fresh fish or produce.
    • Comes with 2 Years Parts & Labour Warranty
    • Recommended Water Filter
    • Dimensions: 1080mm (width) x 700mm (depth) x 780mm (height)
    • Suitable with Hoshiaki Ice Storage Bin B-340SA
                     Free Kerb – Side Delivery : UK mainland only       Product Code: HOSFM1800             Before ordering;  CONTACT US FOR AVAILABILITY.
  • The Hoshizaki FM-1000AKE-SB modular flake ice maker.
    • Produces either Flake or Nugget (-N) ice, special order only.
    • Members of the Emerald Class, Hoshizaki’s new range of climate friendly ice makers.
    • Can produce up to 1030kg of ice (flake) and 860kg (nugget) per 24 hours (AT.10°C.WT.10°C).
    • Flake ice applications: food processing, fish and fresh produce display, organ transportation in medical arena.
    • Nugget ice applications: packaged produce display (bottled beverages and food) and as key ingredient in beverages.
    • Efficient ice making process due to Hoshizaki’s unique FM auger system. Utilises all water brought into the machine; therefore water consumption is equal to ice production.
    • Auger is made of double hardened stainless steel. Combined with carbon bearings, they work optimally in a tough and wet environment. Benefits include: longer product life expectancy and reduced maintenance costs.
    • Electronically controlled to ensure an optimised ice making process under varying circumstances without the need for physical adjustments. Quality of ice is always consistent.
    • Main characteristic of Hoshizaki’s Flake ice is that ‘freeze- burn’ is prevented when displaying fresh fish or produce.
    • Comes with 2 Years Parts & Labour Warranty
    • Recommended Water Filter.Hoshizaki 4 HC-H Triple Filter.
    • Dimensions: 762mm (width) x 700mm (depth) x 780mm (height)
    • Suitable with Hoshiaki Ice Storage Bin B-340SA or the Hoshiaki Ice Storage Bin B-210SA
                    Free Kerb – Side Delivery : UK mainland only                       Product Code: HOSFM1000                                    Before ordering;  CONTACT US FOR AVAILABILITY.
  • The Hoshizaki FM-600AKE-R452 -SB modular flake ice maker.
    • Produces either Flake or Nugget (-N) ice, special order only
    • Members of the Emerald Class, Hoshizaki’s new range of climate friendly ice makers.
    • Can produce up to 600kg of ice (flake) and 580kg (nugget) per 24 hours (AT.10°C.WT.10°C).
    • Flake ice applications: food processing, fish and fresh produce display, organ transportation in medical arena.
    • Nugget ice applications: packaged produce display (bottled beverages and food) and as key ingredient in beverages.
    • Efficient ice making process due to Hoshizaki’s unique FM auger system. Utilises all water brought into the machine; therefore water consumption is equal to ice production.
    • Auger is made of double hardened stainless steel. Combined with carbon bearings, they work optimally in a tough and wet environment. Benefits include: longer product life expectancy and reduced maintenance costs.
    • Electronically controlled to ensure an optimised ice making process under varying circumstances without the need for physical adjustments. Quality of ice is always consistent.
    • Main characteristic of Hoshizaki’s Flake ice is that ‘freeze- burn’ is prevented when displaying fresh fish or produce.
    • Comes with 2 Years Parts & Labour Warranty
    • Recommended Water Filter Hoshizaki 4 HC-H Twin 
    • Dimensions: 560mm (width) x 700mm (depth) x 780mm (height)
    • Volt 1/220-240/50HZ
    • Suitable with Hoshiaki Ice Storage Bin B-140SA or the Hoshiaki Ice Storage Bin B-210SA
                         Free Kerb – Side Delivery : UK mainland only                             Product Code: HOSFM600 Available From Stock
  • ALL ICE MACHINES ARE NOW HYDRO CARBON (HC)
    • Production 65kg of ice in 24 Hours Storage Bin Capacity 18kg
    • Also available as FM-60KE/-N (Nugget Ice)
    • Flake ice applications: food processing, fish and fresh produce display, organ transportation in medical arena.
    • Nugget ice applications: packaged produce display (bottled beverages and food) and as key ingredient in beverages.
    • Refrigerant R 290
    • High Grade Stainless Steel
    • Recommended Water Filter Hoshizaki 4 HC-H Single Filter
    • Gravity Drainage
    • 2 Years Parts and Labour Warranty as Standard
    External Dimensions (mm): H 679 x W 498 x D 570 (legs included) Free Kerb – Side Delivery : UK mainland only Product Code: HOSO35       Before ordering;  CONTACT US FOR AVAILABILITY
  • Out of stock
    Standard features of the Scotsman MF47:
    • Production 300kg of Flake ice in 24 Hours
    • Storage bin not included
    • Hermetic compressor.R290 Stainless steel auger and freezing cylinder (evaporator). Equipped with an electronic control board.
    • Ice breaker made in specially strengthened alloy, allowing for greater extrusion pressure to deliver a dryer-quality of ice (85% dry).
    • Long-lasting stainless steel ball-bearings. Double protection - electronic rotation sensor and drive coupling - on gear motor and gear reducer.
    • Low-water sensor protection on refrigeration and gear motor system. Optical ice level sensor for machine shut down.
    • Stainless steel side panels in scotch-brite finish, with rounded corners for enhanced ease of cleaning and aesthetics.
    • Side panels are removable on all four sides to ease maintenance and after-sales service operations.
    • Recommended Water Filter : HF40s
    • PS plastic top cover.
    • Reduced height to ease installation.
    • Includes 2 Year Warranty Parts Only
    • External Dimensions (mm):H 645 x W 538 x D 663
    • Please check stock before ordering                           Special Order
    Product Code: SCOMF47
  • Model:
    • SIMAG: Self contained Ice  Flaker SPR 80
    • Production 70kg of flake ice in 24 Hours
    • Bin Capacity 25kg
    • Grade 304 Stainless Steel
    • Easy Front-Access Condenser Air Filter do-it-yourself cleaning operation that saves time and money and makes your ice maker last longer
    • Refrigerant: R134a
    • Gravity Drainage
    • Recommended Water Filter : HF20s
    • Includes 3 Year Parts Only Warranty 
    • Please check stock before ordering

    External Dimensions (mm): H 880 (legs + 115) x W 529 x D 626mm.

  • Model:
    • SIMAG: Self contained Ice  Flaker
    • Production 190kg of flake ice in 24 Hours
    • Bin Capacity 55kg
    • Grade 304 Stainless Steel
    • High grade 441 stainless steel (scoth brite) exterior
    • Easy Front-Access Condenser Air Filter do-it-yourself cleaning operation that saves time and money and makes your ice maker last longer
    • Gravity Drainage
    • Recommended Water Filter : HF20s
    • Includes 3 Year Parts Only Warranty
    • Free Kerb – Side Delivery : UK mainland only
    • Please check stock before ordering
                   

    External Dimensions (mm): H 867 (legs + 115) x W 920 x D 594mm.

  • Model:
    • SIMAG: Self contained Ice  Flaker
    • Production 120kg of flake ice in 24 Hours
    • Bin Capacity 55kg
    • Grade 304 Stainless Steel
    • High grade 441 stainless steel (scoth brite) exterior
    • Easy Front-Access Condenser Air Filter do-it-yourself cleaning operation that saves time and money and makes your ice maker last longer
    • Optional Easy-Fit System (Built-in drain pump)
    • Gravity Drainage
    • Recommended Water Filter : HF20s
    • Includes 3 Year Parts Only Warranty 
    • Free Kerb – Side Delivery : UK mainland only
    • Please check stock before ordering
                             Please check stock before ordering

    External Dimensions (mm): H 867 (legs + 115) x W 920 x D 594mm.

  •      Features and Benefits:                             Ice-O-Matic Modular Ice Flaker: MFI-1255              Flake Ice extends the shelf life and appearance of seafood. Fresh fruits and vegetables for fresher displays that help increase sales. Flake Ice is also ideal for use in bakeries, perishable food transport and health care applications.  Only 21" (533 mm) wide.
    • Produces up to 506 kg of Flake ice per day.
    • System Safe load monitoring system constantly checks workload on gearbox – shutting down system before a problem develops and preventing costly repairs.
    • Water sensor eliminates low or no water failures and on certain models cannot be affected by adverse water conditions.
    • Rugged stainless steel evaporator and auger ensures reliability.
    • Industrial-grade roller bearings and heavy-duty gearbox provide years of trouble-free service.
    • Voltage 220-240V. 16 Amp.
    • Warranty 3 Year Parts and Labour.
    • Recommended Water Filter HF20s
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
    • Dimensions: 533mm (width) x 610mm (depth) x 686mm (height).  
    •                   Storage bin not included.
    • Free Kerb – Side Delivery : UK mainland only
    Recommended Storage Bin:
  •     Features and Benefits:                        Ice-O-Matic Modular Ice Flaker MFI-0805: Flake Ice extends the shelf life and appearance of seafood. Fresh fruits and vegetables for fresher displays that help increase sales. Flake Ice is also ideal for use in bakeries, perishable food transport and health care applications.        Only 21" (533 mm) wide.
    • Produces up to 343Kg of Flake ice per day.
    • SystemSafe load monitoring system constantly checks workload on gearbox – shutting down system before a problem develops and preventing costly repairs.
    • Water sensor eliminates low or no water failures and cannot be affected by adverse water conditions.
    • Rugged stainless steel evaporator and auger ensures reliability.
    • Industrial-grade roller bearings and heavy-duty gearbox provide years of trouble-free service.
    • Voltage 220- 240V.
    • Warranty 3 Years Parts and Labour.
    • Dimensions: 533mm (width) x 610mm (depth) x 686mm (height).
    • Recommended Water Filter HF20s
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
    • Free Kerb – Side Delivery : UK mainland only
    • Storage Bin NOT Included.
    •                                                       IN STOCK
    Recommended Storage Bin:
  • The Ice-o-Matic UCF-165A is a perfect alternative to the popular Scotsman AF80 Flake Ice Maker. It's size, production rate and storage are very similar. It is also more readily available at this time. Standard features of de Ice-O-Matic UCF- 165A:
    • Flake Ice Makers produce fast cooling, energy efficient ice.
    • Space-saving 535(mm) wide under counter design.
    • Produces up to 70kg of ice per day.
    • Built-in storage bin stores up to 25kg.
    • Constructed from sturdy, corrosion-resistant stainless steel and fingerprint-proof plastic.
    • Ideal for any undercounter or bar application.
    • Contemporary, elegant design.
    • Gravity drain.
    • Dimensions: 535mm (width) x 626mm (depth) x 800mm (937mm incl. legs) (height)
    Space Saving Solutions:
    • Front air discharge design for compact spaces.
    • True undercounter fits below 34" with short leg option • Low profile top saves counter space.
    • Stores up to 25Kg of ice.
    • Easy front access.
    • Removable Air Filter.
    • Recommended Water Filter HF20s
    • We always recommend fitting a water filter to your ice maker. A water filter will prolong the life of the ice machine by stopping impurities and limescale from entering the ice maker, it will also deliver a clearer, brighter, better tasting ice cube for your customer. Break downs caused by limescale build up are not covered under the terms of your warranty and may result in a charge for a non-warranty call.
     
  • WRAS Approved Ice MachineFeatures of the Simag SPN1205 Flake Ice Maker:  
    • Production 1150kg of Flake ice in 24 Hours
    • High grade 441 stainless steel (scotch brite) exterior
    • Food safe plastic interior
    • Front vented - can be built in
    • Electronic controls
    • Produces flaked ice - the residual water contents for Super Flakers SPN and above is 15%
    • Air cooled
    • Easily accessible components
    • Refrigerant R134a
    • Built in cleaning system
    • Storage bin not included
    • Includes 2 Year Warranty Parts Only
    • Free Kerb – Side Delivery : UK mainland only
    • External Dimensions (H x W x D mm): 850 x 1065 x 698
    • Special Order please ring (01480 463938)
    Product Code: SIMSPN1205
  • WRAS Approved Ice MachineFeatures of the Simag SPH 605AS Flake Ice Maker: Production 600kg of Flake ice in 24 Hours
    • High grade 441 stainless steel (scotch brite) exterior
    • Food safe plastic interior
    • Front vented - can be built in
    • Electronic controls
    • Power Supply: 20amp supply
    • Produces flaked ice - the residual water contents for Super Flakers SPH 605As and above is 15%
    • Air cooled
    • Decibels: 70dBA
    • Easily accessible components
    • Refrigerant R290
    • Built in cleaning system
    • Storage bin not included
    • Includes 2 Year Warranty Parts Only
    • Free Kerb – Side Delivery : UK mainland only
    • Weight (kg): 98
    • External Dimensions (H x W x D mm): 790 x 538 x 663  
    •  Please ring for availability. 
    Product Code: SIMSPN605
  • WRAS Approved Ice MachineFeatures of the Simag SPN 405AS Flake Ice Maker:  
    • Production 320kg of Flake ice in 24 Hours
    • High grade 441 stainless steel (scotch brite) exterior
    • Food safe plastic interior
    • Front vented - can be built in
    • Electronic controls
    • Power Supply: 13amp supply
    • Produces flaked ice - the residual water contents for Super Flakers SPN405 and above is 15%
    • Air cooled
    • Easily accessible components
    • Refrigerant R290
    • Weight (kg): 80
    • Decibels: 68dBA
    • Built in cleaning system
    • Storage bin not included
    • Includes 2 Year Warranty Parts Only
    • Free Kerb – Side Delivery : UK mainland only
    • External Dimensions (H x W x D mm): 650 x 538 x 663
                                                                    Product Code: SIMSPN405
  • WRAS Approved Ice MachineFeatures of the Simag SPH 255AS Flake Ice Maker:  
    • Production 200kg of Flake ice in 24 Hours.
    • High grade 441 stainless steel (scotch brite) exterior
    • Food safe plastic interior
    • Front vented - can be built in
    • Electronic controls
    • Power Supply: 13amp supply
    • Produces flaked ice - the residual water contents for Super Flakers SPN405 and above is 15%
    • Air cooled
    • Decibels: 67dBA
    • Easily accessible components
    • Refrigerant R290
    • Built in cleaning system
    • Storage bin not included
    • Includes 2 Year Warranty Parts Only
    • Free Kerb – Side Delivery : UK mainland only
    • Weight (kg): 49.00
    • External Dimensions (H x W x D mm): 531 x 564 x 536
    •   Please ring for availability.         
    Product Code: SIMSPN255
  • WRAS Approved Ice MachineFeatures of the Simag SPN125 Flake Ice Maker:  
    • Production 120kg of Flake ice in 24 Hours
    • High grade 441 stainless steel (scotch brite) exterior
    • Food safe plastic interior
    • Front vented - can be built in
    • Electronic controls
    • Produces flaked ice - the residual water contents for Super Flakers SPN405 and above is 15%
    • Air cooled
    • Easily accessible components
    • Refrigerant R134a
    • Built in cleaning system
    • Storage bin not included
    • Includes 2 Year Warranty Parts Only
    • Free Kerb – Side Delivery : UK mainland only
    • External Dimensions (H x W x D mm): 531 x 564 x 536
                                               In  Stock Product Code: SIMSPN125
  • The Hoshizaki FM-480AKE-HC-SB modular flake ice maker uses Natural Refrigerant R290, which is environmentally friendly and energy efficient.
    • Energy efficient, with savings of 36,3% compared to HFC equivalent model.*
    • Produces either Flake or Nugget (-N) ice.
    • Members of the Emerald Class, Hoshizaki’s new range of climate friendly ice makers.
    • Can produce up to 450kg of ice (flake) and 380kg (nugget) per 24 hours (AT.10°C.WT.10°C).
    • Flake ice applications: food processing, fish and fresh produce display, organ transportation in medical arena.
    • Nugget ice applications: packaged produce display (bottled beverages and food) and as key ingredient in beverages.
    • Efficient ice making process due to Hoshizaki’s unique FM auger system. Utilises all water brought into the machine; therefore water consumption is equal to ice production.
    • Auger is made of double hardened stainless steel. Combined with carbon bearings, they work optimally in a tough and wet environment. Benefits include: longer product life expectancy and reduced maintenance costs.
    • Electronically controlled to ensure an optimised ice making process under varying circumstances without the need for physical adjustments. Quality of ice is always consistent.
    • Main characteristic of Hoshizaki’s Flake ice is that ‘freeze- burn’ is prevented when displaying fresh fish or produce.
    • Comes with 2 Years Parts & Labour Warranty
    • Recommended Water Filter Hoshizaki 4 HC-H Twin Filter 
    • Dimensions: 560mm (width) x 700mm (depth) x 780mm (height)
    • Suitable with Hoshiaki Ice Storage Bin B-140SA or the Hoshiaki Ice Storage Bin B-210SA
    Product Code: HOSFM480                                                          IN STOCK.
  • The Hoshizaki FM-300AKE-HC-SB modular flaker ice maker uses Natural Refrigerant R290, which is environmentally friendly and energy efficient. ALL ICE MACHINES ARE NOW HYDRO CARBON (HC)
    • Energy efficient, with savings of 12.2% compared to HFC equivalent model.*
    • Produces either Flake or Nugget (-N) ice.
    • Members of the Emerald Class, Hoshizaki’s new range of climate friendly ice makers.
    • Can produce up to 300kg of ice (flake) and 250kg (nugget) per 24 hours (AT.10°C.WT.10°C).
    • Flake ice applications: food processing, fish and fresh produce display, organ transportation in medical arena.
    • Nugget ice applications: packaged produce display (bottled beverages and food) and as key ingredient in beverages.
    • Efficient ice making process due to Hoshizaki’s unique FM auger system. Utilises all water brought into the machine; therefore water consumption is equal to ice production.
    • Auger is made of double hardened stainless steel. Combined with carbon bearings, they work optimally in a tough and wet environment. Benefits include: longer product life expectancy and reduced maintenance costs.
    • Electronically controlled to ensure an optimised ice making process under varying circumstances without the need for physical adjustments. Quality of ice is always consistent.
    • Main characteristic of Hoshizaki’s Flake ice is that ‘freeze- burn’ is prevented when displaying fresh fish or produce.
    • Comes with 2 Years Parts & Labour Warranty
    • Recommended Water Filter 4HC -H Twin
    • Dimensions: 560mm (width) x 700mm (depth) x 780mm (height)
    • Suitable with Hoshiaki Ice Storage Bin B-301SA
    Product Code: HOSFM300                               Available From Stock.  
Go to Top